Note: These instructions may vary somewhat, depending on your TradeStation version number, as your menus and tool bars may change occasionally or be different. These indicators will work on either 3.5x or 4.0x or TS 2000 and TS 2000i Pro Suite, and also SuperCharts Real-Time Program. These instructions are not applicable for the new TradeStation Pro.

Run TradeStation and put a chart page on your screen.
Place the 3½ disk in your floppy drive

Installation Instructions for Omega Tradestation 2000 and ProSuite 2000i
Run The GlobalServer and Tradestation
Open or Create Workspace and Chart Window
Click on Go
Go to EasyLanguage PowerEditor
Click On File
Go to Import and Export
Click on Import EasyLanguage Archive File (ELA and ELS)
Click on Next
Type A: into the Location of your EasyLanguage Archive file Box
Note: This is the drive letter of your Floppy Drive, normally A:
Click Browse, making sure the NB disk is in the drive
Click on the file named nobrainer-br.els
Click Open
The path A:\nobrainer-br.els will appear in the box
Click Next
Analysis Types Function and Indicator should be checked
Click Next
Calc Time and the NB indicators should be checked
Click Finish, the indicators will automatically import and verify
Click OK
Click Go and return to Omega Research TS After transferring all indicators to your hard disk you may plot the indicators on your Tradestation 2000i and
ProSuite 2000i: screen as follows:
Click on File
Go to Open Workspace or Create a New
Click On & Open the Workspace in the MyWork Directory
Go to Insert
Click on Indicator from the Pull-Down Menu
To select multiple indicators Hold Down the Control Key continuously while clicking-on indicators used by
CTCN's No Brainer Methodology.

Installation Instruction for Omega TradeStation 4.0:
Run the GlobalServer and Tradestation
Open or Create Workspace and Chart Window
Go to Tools
Go to PowerEditor from Pull-Down Menu
Go to File
Click on Open from Pull-Down Menu
Click-On Transfer Button on lower right side of screen
Click On Transfer Analysis Techniques FROM EasyLanguage Archive File ELA
Click-On OK
Enter Floppy Drive Letter, normally A: and making sure disk is in the drive
Click-On Browse
Click-On OK, after highlighting the nobrainer-br.ela file
The Transfer from Archive Screen should now list the From Path a:\ctcn-rs.ela file
Click OK
Click Ok, making sure the Transfer Screen Indicator Button is checked
Hold down your Control Key and NB Indicators so they are all highlighted
Click on OK. They should automatically verify and install
A message will appear saying the transfer was successful.

After transferring all indicators to your hard disk you may plot the indicators on your
Tradestation 4.0 screen as follows:
Click on Insert on the Tool Bar
Click On Analysis Techniques from the Pull-Down Menu
Click On Club A and Click On the Plot Button
Click on OK to accept the pre-programmed indicator values. It will plot on the Chart
Continue to do this same operation for all the remaining NB Indicators.

Installation Instructions for TradeStation 3.5 are as follows:
Open Server and TradeStation
Go to Editor
Go to Transfer
Click on the FROM path and make sure set from path is set to A:\ (or b:\)
Click on the TO path and make sure the drive path is set correctly. Normally your TradeStation will be
installed in Drive C and the path will be C:\OMEGA\TS
Click on OK after the two paths are set correctly
Click on the File Type TRANSFER ALL
Click on OK
Next, all indicators on the disk will copy to your hard disk Omega\TS directory and will then automatically verify,

After transferring all indicators to your hard disk you may plot the indicators on your Tradestation 3.5 Screen
Return to TradeStation

Click on Plot
Click on OK to accept the pre-programmed values for each Indicator
The selected Indicators will automatically plot on the chart
Go to Analysis
Click on Indicator
Click on Add
Highlight each indicator you wish to plot,
Click on Add after the indicator is highlighted,
Do this for all NB Indicators which contain all algorithms used by CTCN's NB Methodology.
Click on ADD to plot them on screen after clicking on the individual indicators you want to plot.

You may turn on or turn off any or all the indicators by clicking on the STATUS button to change their status. Note: They should all automatically have their status turned on after copying and adding them.

Next click on OK, after making sure all NB Indicators are listed and their status is ON.

For assistance and support please send e-mail to SoftwareSupport@webtrading.com

By the way, e-mail is the preferred choice for the easiest and fastest response.

Instructions Dated Sept 2001
Copyright © 2000-2001 by Webtrading.com